Canada's Well Water Guide
Loading regions
British Columbia • 631 Registered Wells

Cobble Hill Water Well Depth & Hydrogeology

Regional groundwater summary • British Columbia Historical Log Extraction

Bottom Line Up Front

In Cobble Hill, the median completed well is 191 ft deep.

A published hardness range for this place and aquifer is less than 10 to 180, and groundwater can exceed 1,000 mg/L as CaCO₃. That is a regional estimate, not a test of your well. Source: Estimate based on B.C. Ministry of Environment water-quality checks.

Most production draws from Unconsolidated (about 33% of local wells).

These municipal aggregates support planning only — they do not replace an accredited laboratory potability test for your own well.

Interactive Well Depth & Modeled Typical Strata

Drag the indicator line or tap a stratum below to read the recorded depth range

Drilling in: Sand & Gravel Aquifer (37–420+ ft)Glacial Drift Aquifer

Modelled Depth

191 FT

Area median

Drilling cost

$13,370–$28,650

Estimate

Published hardness

less than 10 to 180, and groundwater can exceed 1,000 mg/L as CaCO₃

0 ft (Surface)Median 191 ft420 ft (Deep)
Topsoil & Surficial Organics
Glacial Drift Silt & Till
Sand & Gravel Aquifer
Modeled typical strata:

Modeled typical strata — placeholder from median depth + aquifer type; not local driller logs.

Well Statistics

Local measurements compared against British Columbia provincial benchmarks.

Total Registered Wells 631
Median Well Depth 191 ft
BC benchmark: 162 ft provincial median
Average Well Depth 231.2 ft
Dominant Aquifer Unconsolidated
Hardness less than 10 to 180, and groundwater can exceed 1,000 mg/L as CaCO₃ — Estimate. Estimate based on B.C. Ministry of Environment water-quality checks
Drilling cost $13,370–$28,650 — Estimate. Typical drilling prices in Canada, about $70–$150 per foot
Domestic Household Use 76% of wells

Where This Report Applies

Approximate boundary of Cobble Hill

Shaded area is an approximate municipal outline for orientation only. Well records are aggregated across the entire Cobble Hill.

Depth Distribution

Most completed wells fall near the median depth of 191 ft. Recorded depths cover 626 wells.

0–49 ft 7.2% · 45
49–98 ft 16% · 100
98–148 ft 12% · 75
148–197 ft 16.1% · 101
197–295 ft 22.7% · 142
295–394 ft 9.1% · 57
394–591 ft 12% · 75
591+ ft 5% · 31

Median depth of 191 ft falls inside the reported range. Deeper completions here usually mean higher mineral content but steadier year-round pressure.

Aquifer Composition

Bedrock and drift aquifers recorded by drillers in this area. Recorded for 339 of these 631 wells.

Undifferentiated Aquifer Regional Formation
32.6%

206 of 631 Unclassified hydrogeological formation from legacy provincial drill records.

Carbonate Bedrock (Limestone / Dolomite) Primary Bedrock Aquifer
21.1%

133 of 631 Major regional bedrock aquifer formed by Ordovician/Silurian dolomite. Known for reliable, high-volume yields with elevated mineral hardness and dissolved calcium/magnesium carbonates.

41 holes found no usable water. test holes, observation or monitoring wells, dewatering wells, decommissioned wells, dry holes, no-aquifer holes, and other non-supply wells filtered out of the headline

Water Quality Profile

A published hardness range, when one exists for this place and aquifer. Not a test of your well.

Measured nearby

Measured government tests within 25 km of Cobble Hill.

Soft (<60) Med (61–120) Hard (121–180) V. hard (>180)

USGS (2018) bands reprinted by Health Canada. A range can cross more than one band. This is not a sample.

What this is not

  • Not a laboratory result for a well on your property.
  • Not a reason to size a softener. Size equipment from a lab test.
  • Not a drilling quote. A cost line on this page is a national estimate, not a price for one well.

Health Canada has not set a maximum acceptable concentration for hardness. A wide published range can sit in more than one USGS band.

Drilling Activity

Historical permit and construction activity by decade.

Pre-1970 14 wells
1970s 58 wells
1980s 154 wells
1990s 133 wells
2000s 56 wells
2010s 75 wells
2020s 42 wells

Treatment

Size treatment from a laboratory test

This page does not turn a hardness range or a well depth into an equipment total, a grain capacity, or a drilling price. Read the methodology, the filtration guide, and the products catalog.

Suggested system

Suggested system for Cobble Hill

1

Test kit

estimate, confirm with a lab test

A test of your own well comes before any equipment. Test for coliform bacteria.

Water testing
2

Sediment prefilter

estimate, confirm with a lab test

A sediment prefilter is worth considering where wells draw from Unconsolidated. This follows the aquifer type.

Sediment guide
3

Iron and manganese filter

estimate, confirm with a lab test

Manganese above the aesthetic objective, consider an iron/manganese filter. A monitoring well near this place has median iron of 1.7 mg/L and median manganese of 0.235 mg/L.

Iron and manganese guide
4

UV disinfection

estimate, confirm with a lab test

UV disinfection is worth considering where wells draw from Unconsolidated. Test for coliform bacteria. This follows the aquifer type.

Bacteria and UV guide
Local Contractors

Licensed Water Well Drillers Serving Cobble Hill

Because water wells in Cobble Hill average 191 ft into unconsolidated, contractors equipped with heavy rotary rigs and proper casing seals are recommended. Contact local drillers directly or request competitive bids.

Drillwell Enterprises Ltd.

Yard: Duncan, BC (9.9 km away)

Confirm the contractor's provincial licence before you hire
Island Bedrock Formations Artesian Well Sealing Geothermal

Fraser Valley Well Drilling

Yard: Abbotsford, BC (99.3 km away)

Confirm the contractor's provincial licence before you hire
Residential Drinking Wells Pump Installations Well Decommissioning

A & H Drilling Ltd.

Yard: Chilliwack, BC (135.8 km away)

Confirm the contractor's provincial licence before you hire
Dual Rotary Drilling Agricultural Irrigation Domestic Wells

Blue Max Drilling Inc.

Yard: Cumberland, BC (145.5 km away)

Confirm the contractor's provincial licence before you hire
Comox Valley Bedrock Domestic Well Drilling Geothermal Heating

Looking for more regional well drillers?

Explore all registered water well contractors operating across BC.

Featured Contractor Spot

Are you a licensed well driller serving Cobble Hill?

Claim your verified listing profile and be found by homeowners on this report.

Claim Local Listing

Frequently Asked Questions

Quick answers about water wells in Cobble Hill.

What is the median well depth in Cobble Hill?

Among 626 producing water wells with a recorded depth, the median is 191.0 ft (58.22 m).

Which aquifer is recorded most often in Cobble Hill?

The most frequently recorded producing aquifer is Unconsolidated, on 206 of 339 wells with a producing aquifer name.

Adjacent Municipalities & Nearby Well Records

Explore neighbouring hydrogeological formations and compare drilling depths

Nearby communities