Regional groundwater summary • British Columbia Historical Log Extraction
Bottom Line Up Front
In Greater Vancouver, the median completed well is 123 ft deep.
A published hardness range for this place and aquifer is less than 10 to 180, and groundwater can exceed 1,000 mg/L as CaCO₃. That is a regional estimate, not a test of your well. Source: Estimate based on B.C. Ministry of Environment water-quality checks.
Most production draws from Unconsolidated (about 60% of local wells).
These municipal aggregates support planning only — they do not replace an accredited laboratory potability test for your own well.
Interactive Well Depth & Modeled Typical Strata
Drag the indicator line or tap a stratum below to read the recorded depth range
Modelled Depth
123 FT
Area median
Drilling cost
$8,610–$18,450
Estimate
Published hardness
less than 10 to 180, and groundwater can exceed 1,000 mg/L as CaCO₃
Modeled typical strata — placeholder from median depth + aquifer type; not local driller logs.
Local measurements compared against British Columbia provincial benchmarks.
| Hydrogeological Metric | From the registry or a cited study | BC Provincial Benchmark |
|---|---|---|
| Total Registered Wells | 5,527 | — |
| Median Well Depth | 123 ft | 162 ft provincial median |
| Average Well Depth | 153.0 ft | — |
| Dominant Aquifer | Unconsolidated | — |
| Hardness | less than 10 to 180, and groundwater can exceed 1,000 mg/L as CaCO₃ — Estimate. Estimate based on B.C. Ministry of Environment water-quality checks | — |
| Drilling cost | $8,610–$18,450 — Estimate. Typical drilling prices in Canada, about $70–$150 per foot | — |
| Domestic Household Use | 84% of wells | — |
Approximate boundary of Greater Vancouver
Shaded area is an approximate municipal outline for orientation only. Well records are aggregated across the entire Greater Vancouver.
Most completed wells fall near the median depth of 123 ft. Recorded depths cover 5,370 wells.
Median depth of 123 ft falls inside the reported range. Deeper completions here usually mean higher mineral content but steadier year-round pressure.
Bedrock and drift aquifers recorded by drillers in this area. Recorded for 3,517 of these 5,527 wells.
3,338 of 5,527 Unclassified hydrogeological formation from legacy provincial drill records.
179 of 5,527 Major regional bedrock aquifer formed by Ordovician/Silurian dolomite. Known for reliable, high-volume yields with elevated mineral hardness and dissolved calcium/magnesium carbonates.
1,171 holes found no usable water. test holes, observation or monitoring wells, dewatering wells, decommissioned wells, dry holes, no-aquifer holes, and other non-supply wells filtered out of the headline
A published hardness range, when one exists for this place and aquifer. Not a test of your well.
Measured nearby
Measured government tests within 25 km of Greater Vancouver.
USGS (2018) bands reprinted by Health Canada. A range can cross more than one band. This is not a sample.
What this is not
Health Canada has not set a maximum acceptable concentration for hardness. A wide published range can sit in more than one USGS band.
OBS WELL 447 - SURREY (TYNEHEAD PARK), 8.87 km away, nearby.
5 government lab tests, dated 2013–2016.
Hardness 96–139 mg/L as CaCO₃, median 138.
Worked out by wellwaterguide.ca from 5 government lab tests.
reported hardness, or calculated from measured calcium and magnesium when hardness was not reported
BC Environmental Monitoring Data System (EnMoDS) results: Provincial Groundwater Observation Well Network wells Open Government Licence - British Columbia
OBS WELL 275 - SURREY (36TH AVE NEAR 194TH ST), 16.11 km away, in the wider area.
31 government lab tests, dated 1988–2017.
Hardness 17–177 mg/L as CaCO₃, median 75.
Worked out by wellwaterguide.ca from 31 government lab tests.
reported hardness, or calculated from measured calcium and magnesium when hardness was not reported
BC Environmental Monitoring Data System (EnMoDS) results: Provincial Groundwater Observation Well Network wells Open Government Licence - British Columbia
OBS WELL 353 - LANGLEY, 16.4 km away, in the wider area.
32 government lab tests, dated 2004–2017.
Hardness 63–122 mg/L as CaCO₃, median 78.6.
Worked out by wellwaterguide.ca from 32 government lab tests.
reported hardness, or calculated from measured calcium and magnesium when hardness was not reported
BC Environmental Monitoring Data System (EnMoDS) results: Provincial Groundwater Observation Well Network wells Open Government Licence - British Columbia
8 wells tested, range 13–241 mg/L.
10.01 km away, in the wider area.
Tests dated 1992–2020.
1 well tests above 180 mg/L.
Worked out by wellwaterguide.ca from 16 government lab tests.
reported hardness, or calculated from measured calcium and magnesium when hardness was not reported
BC Environmental Monitoring Data System (EnMoDS) results: Provincial Groundwater Observation Well Network wells Open Government Licence - British Columbia
Historical permit and construction activity by decade.
Treatment
This page does not turn a hardness range or a well depth into an equipment total, a grain capacity, or a drilling price. Read the methodology, the filtration guide, and the products catalog.
Suggested system
Test kit
estimate, confirm with a lab testA test of your own well comes before any equipment. Test for coliform bacteria.
Water testingSediment prefilter
estimate, confirm with a lab testA sediment prefilter is worth considering where wells draw from Unconsolidated. This follows the aquifer type.
Sediment guideIron and manganese filter
estimate, confirm with a lab testManganese above the aesthetic objective, consider an iron/manganese filter. One monitoring well near this place has median iron of 0.55 mg/L and median manganese of 0.0779 mg/L. Another has median manganese of 0.0846 mg/L. Another has median manganese of 0.0295 mg/L.
Iron and manganese guideWater softener
estimate, confirm with a lab testA softener is worth considering. The nearest monitoring well has a median hardness of 138 mg/L as CaCO₃.
Hard-water guideUV disinfection
estimate, confirm with a lab testUV disinfection is worth considering where wells draw from Unconsolidated. Test for coliform bacteria. This follows the aquifer type.
Bacteria and UV guideBecause water wells in Greater Vancouver average 123 ft into unconsolidated, contractors equipped with heavy rotary rigs and proper casing seals are recommended. Contact local drillers directly or request competitive bids.
Yard: Abbotsford, BC (39.8 km away)
Yard: Chilliwack, BC (70.6 km away)
Yard: Duncan, BC (75.2 km away)
Yard: Cumberland, BC (165.2 km away)
Looking for more regional well drillers?
Explore all registered water well contractors operating across BC.
Featured Contractor Spot
Claim your verified listing profile and be found by homeowners on this report.
Quick answers about water wells in Greater Vancouver.
Among 5370 producing water wells with a recorded depth, the median is 123.0 ft (37.49 m).
The most frequently recorded producing aquifer is Unconsolidated, on 3338 of 3517 wells with a producing aquifer name.
Explore neighbouring hydrogeological formations and compare drilling depths