Canada's Well Water Guide
Loading regions
British Columbia • 199 Registered Wells

Penticton Water Well Depth & Hydrogeology

Regional groundwater summary • British Columbia Historical Log Extraction

Bottom Line Up Front

In Penticton, the median completed well is 280 ft deep.

A published hardness range for this place and aquifer is less than 10 to 180, and groundwater can exceed 1,000 mg/L as CaCO₃. That is a regional estimate, not a test of your well. Source: Estimate based on B.C. Ministry of Environment water-quality checks.

Most production draws from Bedrock (about 44% of local wells).

These municipal aggregates support planning only — they do not replace an accredited laboratory potability test for your own well.

Interactive Well Depth & Modeled Typical Strata

Drag the indicator line or tap a stratum below to read the recorded depth range

Drilling in: Carbonate Bedrock (Limestone / Dolomite) (44–500+ ft)Primary Bedrock Aquifer

Modelled Depth

280 FT

Area median

Drilling cost

$19,600–$42,000

Estimate

Published hardness

less than 10 to 180, and groundwater can exceed 1,000 mg/L as CaCO₃

0 ft (Surface)Median 280 ft500 ft (Deep)
Topsoil & Surficial Organics
Glacial Drift Silt & Till
Carbonate Bedrock (Limestone / Dolomite)
Modeled typical strata:

Modeled typical strata — placeholder from median depth + aquifer type; not local driller logs.

Well Statistics

Local measurements compared against British Columbia provincial benchmarks.

Total Registered Wells 199
Median Well Depth 280 ft
BC benchmark: 162 ft provincial median
Average Well Depth 286.5 ft
Dominant Aquifer Bedrock
Hardness less than 10 to 180, and groundwater can exceed 1,000 mg/L as CaCO₃ — Estimate. Estimate based on B.C. Ministry of Environment water-quality checks
Drilling cost $19,600–$42,000 — Estimate. Typical drilling prices in Canada, about $70–$150 per foot
Domestic Household Use 82% of wells

Where This Report Applies

Approximate boundary of Penticton

Shaded area is an approximate municipal outline for orientation only. Well records are aggregated across the entire Penticton.

Depth Distribution

Most completed wells fall near the median depth of 280 ft. Recorded depths cover 197 wells.

0–49 ft 8.1% · 16
49–98 ft 6.6% · 13
98–148 ft 7.6% · 15
148–197 ft 9.6% · 19
197–295 ft 18.3% · 36
295–394 ft 24.9% · 49
394–591 ft 21.3% · 42
591+ ft 3.6% · 7

Median depth of 280 ft falls inside the reported range. Deeper completions here usually mean higher mineral content but steadier year-round pressure.

Aquifer Composition

Bedrock and drift aquifers recorded by drillers in this area. Recorded for 109 of these 199 wells.

Carbonate Bedrock (Limestone / Dolomite) Primary Bedrock Aquifer
43.7%

87 of 199 Major regional bedrock aquifer formed by Ordovician/Silurian dolomite. Known for reliable, high-volume yields with elevated mineral hardness and dissolved calcium/magnesium carbonates.

Undifferentiated Aquifer Regional Formation
11.1%

22 of 199 Unclassified hydrogeological formation from legacy provincial drill records.

36 holes found no usable water. test holes, observation or monitoring wells, dewatering wells, decommissioned wells, dry holes, no-aquifer holes, and other non-supply wells filtered out of the headline

Water Quality Profile

A published hardness range, when one exists for this place and aquifer. Not a test of your well.

Measured nearby

Measured government tests within 25 km of Penticton.

Soft (<60) Med (61–120) Hard (121–180) V. hard (>180)

USGS (2018) bands reprinted by Health Canada. A range can cross more than one band. This is not a sample.

What this is not

  • Not a laboratory result for a well on your property.
  • Not a reason to size a softener. Size equipment from a lab test.
  • Not a drilling quote. A cost line on this page is a national estimate, not a price for one well.

Health Canada has not set a maximum acceptable concentration for hardness. A wide published range can sit in more than one USGS band.

Drilling Activity

Historical permit and construction activity by decade.

Pre-1970 3 wells
1970s 4 wells
1980s 15 wells
1990s 23 wells
2000s 39 wells
2010s 25 wells
2020s 11 wells

Treatment

Size treatment from a laboratory test

This page does not turn a hardness range or a well depth into an equipment total, a grain capacity, or a drilling price. Read the methodology, the filtration guide, and the products catalog.

Suggested system

Suggested system for Penticton

1

Test kit

estimate, confirm with a lab test

A test of your own well comes before any equipment. Test for coliform bacteria.

Water testing
2

Iron and manganese filter

estimate, confirm with a lab test

Manganese above the aesthetic objective, consider an iron/manganese filter. A monitoring well near this place has median iron of 0.635 mg/L and median manganese of 0.352 mg/L.

Iron and manganese guide
3

Water softener

estimate, confirm with a lab test

A softener is likely needed. The nearest monitoring well has a median hardness of 235 mg/L as CaCO₃.

Hard-water guide
Local Contractors

Licensed Water Well Drillers Serving Penticton

Because water wells in Penticton average 280 ft into bedrock, contractors equipped with heavy rotary rigs and proper casing seals are recommended. Contact local drillers directly or request competitive bids.

Aqua Source Drilling

Yard: Vernon, BC (93.4 km away)

Confirm the contractor's provincial licence before you hire
Okanagan Aquifers Deep Sand & Gravel Domestic Wells

Bud’s Water Wells Ltd.

Yard: Kamloops, BC (136.5 km away)

Confirm the contractor's provincial licence before you hire
Interior BC Bedrock Submersible Pumps Pressure Tanks

A & H Drilling Ltd.

Yard: Chilliwack, BC (170.2 km away)

Confirm the contractor's provincial licence before you hire
Dual Rotary Drilling Agricultural Irrigation Domestic Wells

Fraser Valley Well Drilling

Yard: Abbotsford, BC (206 km away)

Confirm the contractor's provincial licence before you hire
Residential Drinking Wells Pump Installations Well Decommissioning

Looking for more regional well drillers?

Explore all registered water well contractors operating across BC.

Featured Contractor Spot

Are you a licensed well driller serving Penticton?

Claim your verified listing profile and be found by homeowners on this report.

Claim Local Listing

Frequently Asked Questions

Quick answers about water wells in Penticton.

What is the median well depth in Penticton?

Among 197 producing water wells with a recorded depth, the median is 280.0 ft (85.34 m).

Which aquifer is recorded most often in Penticton?

The most frequently recorded producing aquifer is Bedrock, on 87 of 109 wells with a producing aquifer name.

Adjacent Municipalities & Nearby Well Records

Explore neighbouring hydrogeological formations and compare drilling depths

Nearby communities