1
Test kit
estimate, confirm with a lab testA test of your own well comes before any equipment. Test for coliform bacteria.
Water testing Manitoba • 845 Registered Wells
Municipality of Roblin Water Well Depth & Hydrogeology
Regional groundwater summary • GWDrill Historical Log Extraction
Bottom Line Up Front
In Municipality of Roblin, the median completed well is 99 ft deep.
A published hardness range for this place and aquifer is less than 100 to greater than 5,000 mg/L as CaCO₃. That is a regional estimate, not a test of your well. Source: Estimate based on Manitoba Water Stewardship. Birdtail / Assiniboine West (05ME) groundwater resources..
Most production draws from SAND AND GRAVEL (about 94% of local wells).
These municipal aggregates support planning only — they do not replace an accredited laboratory potability test for your own well.
Interactive Well Depth & Geological Stratigraphy (From Local Driller Logs)
Drag the indicator line or tap a geological stratum below to read the recorded depth range
Drilling in: Sand & Gravel Aquifer (60–120 ft)Glacial Drift Aquifer
Modelled Depth
99 FT
Area median
Drilling cost
$6,930–$14,850
Estimate
Published hardness
less than 100 to greater than 5,000 mg/L as CaCO₃
0 ft (Surface)Median 99 ft680 ft (Deep)
Glacial Lacustrine Clay & Silt
Sand & Gravel Aquifer
Sand & Gravel Aquifer
Sedimentary Shale Formation
From local driller logs:
From local driller logs.
Well Statistics
Local measurements compared against Manitoba provincial benchmarks.
Total Registered Wells 845
Median Well Depth 99 ft
MB benchmark: 88 ft provincial median
Average Well Depth 129.0 ft
Recorded Depth Range 7 – 520 ft
Dominant Aquifer SAND AND GRAVEL
Hardness less than 100 to greater than 5,000 mg/L as CaCO₃ — Estimate. Estimate based on Manitoba Water Stewardship. Birdtail / Assiniboine West (05ME) groundwater resources.
Drilling cost $6,930–$14,850 — Estimate. Typical drilling prices in Canada, about $70–$150 per foot
Domestic Household Use 0% of wells
| Hydrogeological Metric | From the registry or a cited study | MB Provincial Benchmark |
|---|---|---|
| Total Registered Wells | 845 | — |
| Median Well Depth | 99 ft | 88 ft provincial median |
| Average Well Depth | 129.0 ft | — |
| Recorded Depth Range | 7 – 520 ft | — |
| Dominant Aquifer | SAND AND GRAVEL | — |
| Hardness | less than 100 to greater than 5,000 mg/L as CaCO₃ — Estimate. Estimate based on Manitoba Water Stewardship. Birdtail / Assiniboine West (05ME) groundwater resources. | — |
| Drilling cost | $6,930–$14,850 — Estimate. Typical drilling prices in Canada, about $70–$150 per foot | — |
| Domestic Household Use | 0% of wells | — |
Where This Report Applies
Approximate boundary of Municipality of Roblin
Shaded area is an approximate municipal outline for orientation only. Well records are aggregated across the entire Municipality of Roblin.
Depth Distribution
Most completed wells fall near the median depth of 99 ft. Recorded depths cover 834 wells.
0–49 ft 19.8% · 165
49–98 ft 30.2% · 252
98–148 ft 17.5% · 146
148–197 ft 10.8% · 90
197–295 ft 13.7% · 114
295–394 ft 6.6% · 55
394–591 ft 1.4% · 12
591+ ft 0% · 0
Median depth of 99 ft falls inside the reported range. Deeper completions here usually mean higher mineral content but steadier year-round pressure.
Aquifer Composition
Bedrock and drift aquifers recorded by drillers in this area.
Sand & Gravel Aquifer Glacial Drift Aquifer
93.6% 791 of 845 Shallow to intermediate glacial drift aquifer deposited in alluvial channels or outwash plains. Yields softer water but requires continuous sediment filtration and shallow bacterial monitoring.
Glacial Drift Silt & Till Protective Overburden
2.6% 22 of 845 Dense, low-permeability clay-rich glacial deposits with localized silt lenses. Serves as a natural confining barrier protecting deeper aquifers from surface contamination.
Undifferentiated Aquifer Regional Formation
1.5% 13 of 845 Unclassified hydrogeological formation from legacy provincial drill records.
Sandstone Bedrock Formation Basal Bedrock Aquifer
1.1% 9 of 845 Deep basal sandstone bedrock unit (including Winnipeg Formation). Supplies exceptionally stable yields; often exhibits moderate mineral hardness with silica-rich water.
Sedimentary Shale Formation Fractured Shale Aquifer
0.7% 6 of 845 Fractured sedimentary shale formation (including Odanah / Pierre members). Characterized by high total dissolved solids (TDS) and potential sulfur/iron compounds.
Carbonate Bedrock (Limestone / Dolomite) Primary Bedrock Aquifer
0.5% 4 of 845 Major regional bedrock aquifer formed by Ordovician/Silurian dolomite. Known for reliable, high-volume yields with elevated mineral hardness and dissolved calcium/magnesium carbonates.
272 holes found no usable water. test holes, observation or monitoring wells, dewatering wells, decommissioned wells, dry holes, no-aquifer holes, and other non-supply wells filtered out of the headline
Water Quality Profile
A published hardness range, when one exists for this place and aquifer. Not a test of your well.
Estimate
less than 100 to greater than 5,000 mg/L as CaCO₃
Estimate. Estimate based on Manitoba Water Stewardship. Birdtail / Assiniboine West (05ME) groundwater resources.. Regional estimate, not a test of your well.
Manitoba Water Stewardship. Birdtail / Assiniboine West (05ME) groundwater resources.
No measured government test within 25 km. Test your water.
Soft (<60) Med (61–120) Hard (121–180) V. hard (>180)
USGS (2018) bands reprinted by Health Canada. A range can cross more than one band. This is not a sample.
What this is not
- Not a laboratory result for a well on your property.
- Not a reason to size a softener. Size equipment from a lab test.
- Not a drilling quote. A cost line on this page is a national estimate, not a price for one well.
Health Canada has not set a maximum acceptable concentration for hardness. A wide published range can sit in more than one USGS band.
Drilling Activity
Historical permit and construction activity by decade.
Pre-1970 86 wells · avg 102 ft
1970s 185 wells · avg 136 ft
1980s 196 wells · avg 122 ft
1990s 113 wells · avg 148 ft
2000s 114 wells · avg 141 ft
2010s 43 wells · avg 145 ft
2020s 35 wells · avg 127 ft
70% of dated wells are over 30 years old (pre-1995). Steel casing installed before 1995 can lose integrity over time. Any older well should get a casing inspection and a certified bacterial test before reliance.
Treatment
Size treatment from a laboratory test
This page does not turn a hardness range or a well depth into an equipment total, a grain capacity, or a drilling price. Read the methodology, the filtration guide, and the products catalog.
Suggested system
Suggested system for Municipality of Roblin
2
Sediment prefilter
estimate, confirm with a lab testA sediment prefilter is worth considering where wells draw from SAND AND GRAVEL. This follows the aquifer type.
Sediment guide 3
UV disinfection
estimate, confirm with a lab testUV disinfection is worth considering where wells draw from SAND AND GRAVEL. Test for coliform bacteria. This follows the aquifer type.
Bacteria and UV guide Local Contractors
Licensed Water Well Drillers Serving Municipality of Roblin
Because water wells in Municipality of Roblin average 99 ft into sand and gravel, contractors equipped with heavy rotary rigs and proper casing seals are recommended. Contact local drillers directly or request competitive bids.
Formation Drilling Ltd.
Yard: Dauphin, MB (92.2 km away)
Confirm the contractor's provincial licence before you hire
Parkland Hydrogeology Artesian Flow Control Glacial Drift Screens
Rob Smith & Son Drilling
Yard: Neepawa, MB (176.8 km away)
Confirm the contractor's provincial licence before you hire
Riding Mountain Slopes Delta Sand Aquifers Farm & Acreage Supply
Fred A. Zavislak Well Drilling Ltd.
Yard: Brandon, MB (184.7 km away)
★ 4.5
(8 Google reviews)
Westman Drilled Wells Deep Sand Screens Residential Acreages
Interlake Water Supply Co Ltd.
Yard: Inwood, MB (282.8 km away)
★ 4.0
(4 Google reviews)
Interlake Limestone Bedrock Artesian Flow Relief Pasture Wells
Looking for more regional well drillers?
Explore all registered water well contractors operating across MB.
Featured Contractor Spot
Are you a licensed well driller serving Municipality of Roblin?
Claim your verified listing profile and be found by homeowners on this report.
Frequently Asked Questions
Quick answers about water wells in Municipality of Roblin.
What is the median well depth in Municipality of Roblin?
Among 834 producing water wells with a recorded depth, the median is 99.0 ft (30.1752 m).
Which aquifer is recorded most often in Municipality of Roblin?
The most frequently recorded producing aquifer is SAND AND GRAVEL, on 791 of 845 wells with a producing aquifer name.
Adjacent Municipalities & Nearby Well Records
Explore neighbouring hydrogeological formations and compare drilling depths