Canada's Well Water Guide
Loading regions
Manitoba • 751 Registered Wells

Yellowhead Municipality Water Well Depth & Hydrogeology

Regional groundwater summary • GWDrill Historical Log Extraction

Bottom Line Up Front

In Yellowhead Municipality, the median completed well is 110 ft deep.

A published hardness range for this place and aquifer is under 60 to above 180 mg/L as CaCO₃. That is a regional estimate, not a test of your well. Source: Estimate based on Health Canada hardness bands.

Most production draws from SHALE (about 67% of local wells).

These municipal aggregates support planning only — they do not replace an accredited laboratory potability test for your own well.

Interactive Well Depth & Geological Stratigraphy (From Local Driller Logs)

Drag the indicator line or tap a geological stratum below to read the recorded depth range

Drilling in: Sedimentary Shale Formation (26–460+ ft)Fractured Shale Aquifer

Modelled Depth

110 FT

Area median

Drilling cost

$7,700–$16,500

Estimate

Published hardness

under 60 to above 180 mg/L as CaCO₃

0 ft (Surface)Median 110 ft460 ft (Deep)
Topsoil & Surficial Organics
Glacial Drift Silt & Till
Sedimentary Shale Formation
From local driller logs:

From local driller logs.

Well Statistics

Local measurements compared against Manitoba provincial benchmarks.

Total Registered Wells 751
Median Well Depth 110 ft
MB benchmark: 88 ft provincial median
Average Well Depth 118.4 ft
Recorded Depth Range 7 – 380 ft
Dominant Aquifer SHALE
Hardness under 60 to above 180 mg/L as CaCO₃ — Estimate. Estimate based on Health Canada hardness bands
Drilling cost $7,700–$16,500 — Estimate. Typical drilling prices in Canada, about $70–$150 per foot
Domestic Household Use 0% of wells

Where This Report Applies

Approximate boundary of Yellowhead Municipality

Shaded area is an approximate municipal outline for orientation only. Well records are aggregated across the entire Yellowhead Municipality.

Depth Distribution

Most completed wells fall near the median depth of 110 ft. Recorded depths cover 723 wells.

0–49 ft 9.8% · 71
49–98 ft 31.1% · 225
98–148 ft 31.1% · 225
148–197 ft 18% · 130
197–295 ft 9.1% · 66
295–394 ft 0.8% · 6
394–591 ft 0% · 0
591+ ft 0% · 0

Median depth of 110 ft falls inside the reported range. Deeper completions here usually mean higher mineral content but steadier year-round pressure.

Aquifer Composition

Bedrock and drift aquifers recorded by drillers in this area.

Sedimentary Shale Formation Fractured Shale Aquifer
67.2%

505 of 751 Fractured sedimentary shale formation (including Odanah / Pierre members). Characterized by high total dissolved solids (TDS) and potential sulfur/iron compounds.

Sand & Gravel Aquifer Glacial Drift Aquifer
24.8%

186 of 751 Shallow to intermediate glacial drift aquifer deposited in alluvial channels or outwash plains. Yields softer water but requires continuous sediment filtration and shallow bacterial monitoring.

Undifferentiated Aquifer Regional Formation
7.5%

56 of 751 Unclassified hydrogeological formation from legacy provincial drill records.

Glacial Drift Silt & Till Protective Overburden
0.5%

4 of 751 Dense, low-permeability clay-rich glacial deposits with localized silt lenses. Serves as a natural confining barrier protecting deeper aquifers from surface contamination.

142 holes found no usable water. test holes, observation or monitoring wells, dewatering wells, decommissioned wells, dry holes, no-aquifer holes, and other non-supply wells filtered out of the headline

Water Quality Profile

A published hardness range, when one exists for this place and aquifer. Not a test of your well.

Estimate

under 60 to above 180 mg/L as CaCO₃

Estimate. Estimate based on Health Canada hardness bands. Regional estimate, not a test of your well.

Health Canada. Guidelines for Canadian Drinking Water Quality: Operational Parameters.

No measured government test within 25 km. Test your water.

Soft (<60) Med (61–120) Hard (121–180) V. hard (>180)

USGS (2018) bands reprinted by Health Canada. A range can cross more than one band. This is not a sample.

What this is not

  • Not a laboratory result for a well on your property.
  • Not a reason to size a softener. Size equipment from a lab test.
  • Not a drilling quote. A cost line on this page is a national estimate, not a price for one well.

Health Canada has not set a maximum acceptable concentration for hardness. A wide published range can sit in more than one USGS band.

Drilling Activity

Historical permit and construction activity by decade.

Pre-1970 117 wells · avg 82 ft
1970s 144 wells · avg 116 ft
1980s 145 wells · avg 127 ft
1990s 104 wells · avg 132 ft
2000s 81 wells · avg 132 ft
2010s 39 wells · avg 128 ft
2020s 34 wells · avg 135 ft

70% of dated wells are over 30 years old (pre-1995). Steel casing installed before 1995 can lose integrity over time. Any older well should get a casing inspection and a certified bacterial test before reliance.

Treatment

Size treatment from a laboratory test

This page does not turn a hardness range or a well depth into an equipment total, a grain capacity, or a drilling price. Read the methodology, the filtration guide, and the products catalog.

Suggested system

Suggested system for Yellowhead Municipality

1

Test kit

estimate, confirm with a lab test

A test of your own well comes before any equipment. Test for coliform bacteria.

Water testing
Local Contractors

Licensed Water Well Drillers Serving Yellowhead Municipality

Because water wells in Yellowhead Municipality average 110 ft into shale, contractors equipped with heavy rotary rigs and proper casing seals are recommended. Contact local drillers directly or request competitive bids.

Fred A. Zavislak Well Drilling Ltd.

Yard: Brandon, MB (77.1 km away)

★ 4.5 (8 Google reviews)
Westman Drilled Wells Deep Sand Screens Residential Acreages

Rob Smith & Son Drilling

Yard: Neepawa, MB (78.5 km away)

Confirm the contractor's provincial licence before you hire
Riding Mountain Slopes Delta Sand Aquifers Farm & Acreage Supply

Formation Drilling Ltd.

Yard: Dauphin, MB (80.7 km away)

Confirm the contractor's provincial licence before you hire
Parkland Hydrogeology Artesian Flow Control Glacial Drift Screens

MacKay Drilling & Pumps

Yard: Warren, MB (209.9 km away)

Confirm the contractor's provincial licence before you hire
Submersible Pumps Pressure Tanks Bedrock Casing

Looking for more regional well drillers?

Explore all registered water well contractors operating across MB.

Featured Contractor Spot

Are you a licensed well driller serving Yellowhead Municipality?

Claim your verified listing profile and be found by homeowners on this report.

Claim Local Listing

Frequently Asked Questions

Quick answers about water wells in Yellowhead Municipality.

What is the median well depth in Yellowhead Municipality?

Among 723 producing water wells with a recorded depth, the median is 110.0 ft (33.528 m).

Which aquifer is recorded most often in Yellowhead Municipality?

The most frequently recorded producing aquifer is SHALE, on 505 of 751 wells with a producing aquifer name.

Adjacent Municipalities & Nearby Well Records

Explore neighbouring hydrogeological formations and compare drilling depths

Nearby communities