1
Test kit
estimate, confirm with a lab testA test of your own well comes before any equipment. Test for coliform bacteria.
Water testing Ontario • 10,535 Registered Wells
Haliburton Water Well Depth & Hydrogeology
Regional groundwater summary • Ontario Historical Log Extraction
Bottom Line Up Front
In Haliburton, the median completed well is 167 ft deep.
A published hardness range for this place and aquifer is under 60 to above 180 mg/L as CaCO₃. That is a regional estimate, not a test of your well. Source: Estimate based on Health Canada hardness bands.
Most production draws from Crystalline Bedrock (about 79% of local wells).
These municipal aggregates support planning only — they do not replace an accredited laboratory potability test for your own well.
Interactive Well Depth & Modeled Typical Strata
Drag the indicator line or tap a stratum below to read the recorded depth range
Drilling in: Sand & Gravel Aquifer (35–400+ ft)Glacial Drift Aquifer
Modelled Depth
167 FT
Area median
Drilling cost
$11,690–$25,050
Estimate
Published hardness
under 60 to above 180 mg/L as CaCO₃
0 ft (Surface)Median 167 ft400 ft (Deep)
Topsoil & Surficial Organics
Sand & Gravel Aquifer
Sand & Gravel Aquifer
Modeled typical strata:
Modeled typical strata — placeholder from median depth + aquifer type; not local driller logs.
Well Statistics
Local measurements compared against Ontario provincial benchmarks.
Total Registered Wells 10,535
Median Well Depth 167 ft
ON benchmark: 103 ft provincial median
Average Well Depth 191.3 ft
Dominant Aquifer Crystalline Bedrock
Hardness under 60 to above 180 mg/L as CaCO₃ — Estimate. Estimate based on Health Canada hardness bands
Drilling cost $11,690–$25,050 — Estimate. Typical drilling prices in Canada, about $70–$150 per foot
Domestic Household Use 98% of wells
| Hydrogeological Metric | From the registry or a cited study | ON Provincial Benchmark |
|---|---|---|
| Total Registered Wells | 10,535 | — |
| Median Well Depth | 167 ft | 103 ft provincial median |
| Average Well Depth | 191.3 ft | — |
| Dominant Aquifer | Crystalline Bedrock | — |
| Hardness | under 60 to above 180 mg/L as CaCO₃ — Estimate. Estimate based on Health Canada hardness bands | — |
| Drilling cost | $11,690–$25,050 — Estimate. Typical drilling prices in Canada, about $70–$150 per foot | — |
| Domestic Household Use | 98% of wells | — |
Where This Report Applies
Approximate boundary of Haliburton
Shaded area is an approximate municipal outline for orientation only. Well records are aggregated across the entire Haliburton.
Depth Distribution
Most completed wells fall near the median depth of 167 ft. Recorded depths cover 10,511 wells.
0–49 ft 6.3% · 663
49–98 ft 15.3% · 1,603
98–148 ft 21.6% · 2,274
148–197 ft 13.4% · 1,408
197–295 ft 22.7% · 2,386
295–394 ft 13.4% · 1,406
394–591 ft 6.8% · 710
591+ ft 0.6% · 61
Median depth of 167 ft falls inside the reported range. Deeper completions here usually mean higher mineral content but steadier year-round pressure.
Aquifer Composition
Bedrock and drift aquifers recorded by drillers in this area. Recorded for 10,464 of these 10,535 wells.
Precambrian Crystalline Bedrock (Granite) Crystalline Bedrock Aquifer
79.1% 8,333 of 10,535 Crystalline Canadian Shield rock. Yields soft, slightly acidic water with minimal dissolved solids, relying on secondary fracture networks for groundwater storage.
Sand & Gravel Aquifer Glacial Drift Aquifer
10.9% 1,147 of 10,535 Shallow to intermediate glacial drift aquifer deposited in alluvial channels or outwash plains. Yields softer water but requires continuous sediment filtration and shallow bacterial monitoring.
Carbonate Bedrock (Limestone / Dolomite) Primary Bedrock Aquifer
8% 838 of 10,535 Major regional bedrock aquifer formed by Ordovician/Silurian dolomite. Known for reliable, high-volume yields with elevated mineral hardness and dissolved calcium/magnesium carbonates.
Glacial Lacustrine Clay & Silt Confining Aquitard
1.2% 124 of 10,535 Impermeable glaciolacustrine clay and silt deposits formed in ancient glacial lakes. Acts as an effective regional aquitard confining underlying aquifers.
Sandstone Bedrock Formation Basal Bedrock Aquifer
0.1% 13 of 10,535 Deep basal sandstone bedrock unit (including Winnipeg Formation). Supplies exceptionally stable yields; often exhibits moderate mineral hardness with silica-rich water.
Sedimentary Shale Formation Fractured Shale Aquifer
0.1% 7 of 10,535 Fractured sedimentary shale formation (including Odanah / Pierre members). Characterized by high total dissolved solids (TDS) and potential sulfur/iron compounds.
Undifferentiated Aquifer Regional Formation
0% 2 of 10,535 Unclassified hydrogeological formation from legacy provincial drill records.
633 holes found no usable water. test holes, observation or monitoring wells, dewatering wells, decommissioned wells, dry holes, no-aquifer holes, and other non-supply wells filtered out of the headline
Water Quality Profile
A published hardness range, when one exists for this place and aquifer. Not a test of your well.
Estimate
under 60 to above 180 mg/L as CaCO₃
Estimate. Estimate based on Health Canada hardness bands. Regional estimate, not a test of your well.
Health Canada. Guidelines for Canadian Drinking Water Quality: Operational Parameters.
No measured government test within 25 km. Test your water.
Soft (<60) Med (61–120) Hard (121–180) V. hard (>180)
USGS (2018) bands reprinted by Health Canada. A range can cross more than one band. This is not a sample.
What this is not
- Not a laboratory result for a well on your property.
- Not a reason to size a softener. Size equipment from a lab test.
- Not a drilling quote. A cost line on this page is a national estimate, not a price for one well.
Health Canada has not set a maximum acceptable concentration for hardness. A wide published range can sit in more than one USGS band.
Drilling Activity
Historical permit and construction activity by decade.
Pre-1970 601 wells
1970s 1,033 wells
1980s 1,771 wells
1990s 2,148 wells
2000s 2,031 wells
2010s 1,546 wells
2020s 1,346 wells
45% of dated wells are over 30 years old (pre-1995). Steel casing installed before 1995 can lose integrity over time. Any older well should get a casing inspection and a certified bacterial test before reliance.
Treatment
Size treatment from a laboratory test
This page does not turn a hardness range or a well depth into an equipment total, a grain capacity, or a drilling price. Read the methodology, the filtration guide, and the products catalog.
Suggested system
Suggested system for Haliburton
Local Contractors
Licensed Water Well Drillers Serving Haliburton
Because water wells in Haliburton average 167 ft into crystalline bedrock, contractors equipped with heavy rotary rigs and proper casing seals are recommended. Contact local drillers directly or request competitive bids.
G. Hart & Sons Well Drilling Ltd.
Yard: Fenelon Falls, ON (57.2 km away)
Confirm the contractor's provincial licence before you hire
Kawartha Lakes Cottage Wells Precambrian Granite Hydrofracturing
Drury Well Drilling Ltd.
Yard: Barrie, ON (111.3 km away)
Confirm the contractor's provincial licence before you hire
Simcoe County Bedrock Residential Drinking Wells Pump Diagnostics
Davy Well Drilling Ltd.
Yard: Verona, ON (158.4 km away)
Confirm the contractor's provincial licence before you hire
Frontenac Axis Granite Limestone Bedrock Wells Submersible Pumps
VanDerZalm Well Drilling
Yard: Niagara-on-the-Lake, ON (209.2 km away)
Confirm the contractor's provincial licence before you hire
Niagara Escarpment Formations Vineyard & Farm Irrigation Residential Wells
Looking for more regional well drillers?
Explore all registered water well contractors operating across ON.
Featured Contractor Spot
Are you a licensed well driller serving Haliburton?
Claim your verified listing profile and be found by homeowners on this report.
Frequently Asked Questions
Quick answers about water wells in Haliburton.
What is the median well depth in Haliburton?
Among 10511 producing water wells with a recorded depth, the median is 167.0 ft (50.9 m).
Adjacent Municipalities & Nearby Well Records
Explore neighbouring hydrogeological formations and compare drilling depths