Canada's Well Water Guide
Loading regions
Saskatchewan • 350 Registered Wells

RM of Sherwood No. 159 Water Well Depth & Hydrogeology

Regional groundwater summary • Saskatchewan Historical Log Extraction

Bottom Line Up Front

In RM of Sherwood No. 159, the median completed well is 130 ft deep.

A published hardness range for this place and aquifer is under 60 to above 180 mg/L as CaCO₃. That is a regional estimate, not a test of your well. Source: Estimate based on Health Canada hardness bands.

Most production draws from 10 (about 7% of local wells).

These municipal aggregates support planning only — they do not replace an accredited laboratory potability test for your own well.

Interactive Well Depth & Modeled Typical Strata

Drag the indicator line or tap a stratum below to read the recorded depth range

Drilling in: Sand & Gravel Aquifer (26–400+ ft)Glacial Drift Aquifer

Modelled Depth

130 FT

Area median

Drilling cost

$9,100–$19,500

Estimate

Published hardness

under 60 to above 180 mg/L as CaCO₃

0 ft (Surface)Median 130 ft400 ft (Deep)
Topsoil & Surficial Organics
Sand & Gravel Aquifer
Sand & Gravel Aquifer
Modeled typical strata:

Modeled typical strata — placeholder from median depth + aquifer type; not local driller logs.

Well Statistics

Local measurements compared against Saskatchewan provincial benchmarks.

Total Registered Wells 350
Median Well Depth 130 ft
SK benchmark: 89 ft provincial median
Average Well Depth 132.9 ft
Recorded Depth Range 14 – 400 ft
Dominant Aquifer 10
Hardness under 60 to above 180 mg/L as CaCO₃ — Estimate. Estimate based on Health Canada hardness bands
Drilling cost $9,100–$19,500 — Estimate. Typical drilling prices in Canada, about $70–$150 per foot
Domestic Household Use 84% of wells

Where This Report Applies

Approximate boundary of RM of Sherwood No. 159

Shaded area is an approximate municipal outline for orientation only. Well records are aggregated across the entire RM of Sherwood No. 159.

Depth Distribution

Most completed wells fall near the median depth of 130 ft. Recorded depths cover 348 wells.

0–49 ft 8.6% · 30
49–98 ft 24.4% · 85
98–148 ft 25.3% · 88
148–197 ft 24.4% · 85
197–295 ft 15.5% · 54
295–394 ft 1.4% · 5
394–591 ft 0.3% · 1
591+ ft 0% · 0

Median depth of 130 ft falls inside the reported range. Deeper completions here usually mean higher mineral content but steadier year-round pressure.

Aquifer Composition

Bedrock and drift aquifers recorded by drillers in this area. Recorded for 26 of these 350 wells.

Undifferentiated Aquifer Regional Formation
7.4%

26 of 350 Unclassified hydrogeological formation from legacy provincial drill records.

470 holes found no usable water. test holes, observation or monitoring wells, dewatering wells, decommissioned wells, dry holes, no-aquifer holes, and other non-supply wells filtered out of the headline

Water Quality Profile

A published hardness range, when one exists for this place and aquifer. Not a test of your well.

Measured nearby

Measured government tests within 25 km of RM of Sherwood No. 159.

Soft (<60) Med (61–120) Hard (121–180) V. hard (>180)

USGS (2018) bands reprinted by Health Canada. A range can cross more than one band. This is not a sample.

What this is not

  • Not a laboratory result for a well on your property.
  • Not a reason to size a softener. Size equipment from a lab test.
  • Not a drilling quote. A cost line on this page is a national estimate, not a price for one well.

Health Canada has not set a maximum acceptable concentration for hardness. A wide published range can sit in more than one USGS band.

SWA Regina 530, 6.25 km away, nearby.

4 government lab tests, dated 1978–2005.

These results are old (tested 1978–2005).

Hardness 351–368 mg/L as CaCO₃, median 359.5.

Worked out by wellwaterguide.ca from 4 government lab tests.

reported hardness (as CaCO3)

Saskatchewan observation well network: water-quality results Public data. Water Security Agency confirmed in writing on 2026-10-20 that published observation-well data is public for public use.

SWA Regina 530 water-quality PDF

3 wells tested, range 415–880 mg/L.

2.83 km away, nearby.

Tests dated 2005.

These results are old (tested 2005).

3 wells test above 180 mg/L.

Worked out by wellwaterguide.ca from 3 government lab tests.

reported hardness (as CaCO3)

Saskatchewan observation well network: water-quality results Public data. Water Security Agency confirmed in writing on 2026-10-20 that published observation-well data is public for public use.

SWA Regina Firehall water-quality PDF

SWA Pilot Butte North water-quality PDF

SWA Pilot Butte South water-quality PDF

Water in a provincial observation well isn't necessarily representative of nearby private wells.

Drilling Activity

Historical permit and construction activity by decade.

Pre-1970 70 wells · avg 132 ft
1970s 44 wells · avg 106 ft
1980s 69 wells · avg 139 ft
1990s 43 wells · avg 142 ft
2000s 41 wells · avg 143 ft
2010s 55 wells · avg 134 ft
2020s 19 wells · avg 128 ft

60% of dated wells are over 30 years old (pre-1995). Steel casing installed before 1995 can lose integrity over time. Any older well should get a casing inspection and a certified bacterial test before reliance.

Treatment

Size treatment from a laboratory test

This page does not turn a hardness range or a well depth into an equipment total, a grain capacity, or a drilling price. Read the methodology, the filtration guide, and the products catalog.

Suggested system

Suggested system for RM of Sherwood No. 159

1

Test kit

estimate, confirm with a lab test

A test of your own well comes before any equipment. Test for coliform bacteria.

Water testing
2

Iron and manganese filter

estimate, confirm with a lab test

Manganese above the aesthetic objective, consider an iron/manganese filter. One monitoring well near this place has median iron of 0.57 mg/L and median manganese of 0.69 mg/L. Another has median iron of 0.375 mg/L and median manganese of 0.51 mg/L.

Iron and manganese guide
3

Water softener

estimate, confirm with a lab test

A softener is likely needed. The nearest monitoring well has a median hardness of 948.1 mg/L as CaCO₃.

Hard-water guide
Local Contractors

Licensed Water Well Drillers Serving RM of Sherwood No. 159

Because water wells in RM of Sherwood No. 159 average 130 ft into 10, contractors equipped with heavy rotary rigs and proper casing seals are recommended. Contact local drillers directly or request competitive bids.

Hwy. One Drilling Ltd.

Yard: Weyburn, SK (106.8 km away)

Confirm the contractor's provincial licence before you hire
Southeast Saskatchewan Formations Coal Bed & Sand Aquifers Domestic Wells

J & J Drilling Ltd.

Yard: Yorkton, SK (173.1 km away)

Confirm the contractor's provincial licence before you hire
Parkland Region Aquifers Screened Glacial Drift Farm Water Systems

Wolverine Drilling Inc.

Yard: Humboldt, SK (193.7 km away)

Confirm the contractor's provincial licence before you hire
Rotary Mud Drilling PVC & Steel Casing Aquifer Testing

Assured Drilling Ltd.

Yard: Swift Current, SK (227.6 km away)

Confirm the contractor's provincial licence before you hire
Southwest Saskatchewan Wells Judith River Aquifers Livestock Pasture Systems

Looking for more regional well drillers?

Explore all registered water well contractors operating across SK.

Featured Contractor Spot

Are you a licensed well driller serving RM of Sherwood No. 159?

Claim your verified listing profile and be found by homeowners on this report.

Claim Local Listing

Frequently Asked Questions

Quick answers about water wells in RM of Sherwood No. 159.

What is the median well depth in RM of Sherwood No. 159?

Among 348 producing water wells with a recorded depth, the median is 130.0 ft (39.624 m).

Which aquifer is recorded most often in RM of Sherwood No. 159?

The most frequently recorded producing aquifer is 10, on 25 of 26 wells with a producing aquifer name.

Adjacent Municipalities & Nearby Well Records

Explore neighbouring hydrogeological formations and compare drilling depths

Nearby communities