Canada's Well Water Guide
Loading regions
Yukon • 26 Registered Wells

Dawson City Water Well Depth & Hydrogeology

Regional groundwater summary • Yukon Historical Log Extraction

Bottom Line Up Front

In Dawson City, the median completed well is 60 ft deep.

A published hardness range for this place and aquifer is under 60 to above 180 mg/L as CaCO₃. That is a regional estimate, not a test of your well. Source: Estimate based on Health Canada hardness bands.

These municipal aggregates support planning only — they do not replace an accredited laboratory potability test for your own well.

Interactive Well Depth & Modeled Typical Strata

Drag the indicator line or tap a stratum below to read the recorded depth range

Drilling in: Sand & Gravel Aquifer (15–400+ ft)Glacial Drift Aquifer

Modelled Depth

60 FT

Area median

Drilling cost

$4,200–$9,000

Estimate

Published hardness

under 60 to above 180 mg/L as CaCO₃

0 ft (Surface)Median 60 ft400 ft (Deep)
Topsoil & Surficial Organics
Sand & Gravel Aquifer
Sand & Gravel Aquifer
Modeled typical strata:

Modeled typical strata — placeholder from median depth + aquifer type; not local driller logs.

Well Statistics

Local measurements compared against Yukon provincial benchmarks.

Total Registered Wells 26
Median Well Depth 60 ft
YT benchmark: 134 ft provincial median
Average Well Depth 83.3 ft
Hardness under 60 to above 180 mg/L as CaCO₃ — Estimate. Estimate based on Health Canada hardness bands
Drilling cost $4,200–$9,000 — Estimate. Typical drilling prices in Canada, about $70–$150 per foot
Domestic Household Use 15% of wells

Where This Report Applies

Approximate boundary of Dawson City

Shaded area is an approximate municipal outline for orientation only. Well records are aggregated across the entire Dawson City.

Depth Distribution

Most completed wells fall near the median depth of 60 ft. Recorded depths cover 24 wells.

0–49 ft 45.8% · 11
49–98 ft 33.3% · 8
98–148 ft 0% · 0
148–197 ft 4.2% · 1
197–295 ft 16.7% · 4
295–394 ft 0% · 0
394–591 ft 0% · 0
591+ ft 0% · 0

Median depth of 60 ft falls inside the reported range. Deeper completions here usually mean higher mineral content but steadier year-round pressure.

Aquifer Composition

Bedrock and drift aquifers recorded by drillers in this area.

62 holes found no usable water. test holes, observation or monitoring wells, dewatering wells, decommissioned wells, dry holes, no-aquifer holes, and other non-supply wells filtered out of the headline

Water Quality Profile

A published hardness range, when one exists for this place and aquifer. Not a test of your well.

Estimate

under 60 to above 180 mg/L as CaCO₃

Estimate. Estimate based on Health Canada hardness bands. Regional estimate, not a test of your well.

Health Canada. Guidelines for Canadian Drinking Water Quality: Operational Parameters.

No measured government test within 25 km. Test your water.

Soft (<60) Med (61–120) Hard (121–180) V. hard (>180)

USGS (2018) bands reprinted by Health Canada. A range can cross more than one band. This is not a sample.

What this is not

  • Not a laboratory result for a well on your property.
  • Not a reason to size a softener. Size equipment from a lab test.
  • Not a drilling quote. A cost line on this page is a national estimate, not a price for one well.

Health Canada has not set a maximum acceptable concentration for hardness. A wide published range can sit in more than one USGS band.

Drilling Activity

Historical permit and construction activity by decade.

Pre-1970 0 wells on record
1970s 6 wells
1980s 4 wells
1990s 1 wells
2000s 13 wells
2010s 50 wells
2020s 3 wells

Treatment

Size treatment from a laboratory test

This page does not turn a hardness range or a well depth into an equipment total, a grain capacity, or a drilling price. Read the methodology, the filtration guide, and the products catalog.

Suggested system

Suggested system for Dawson City

1

Test kit

estimate, confirm with a lab test

A test of your own well comes before any equipment. Test for coliform bacteria.

Water testing
Local Contractors

Licensed Water Well Drillers Serving Dawson City

Because water wells in Dawson City average 60 ft, contractors equipped with heavy rotary rigs and proper casing seals are recommended. Contact local drillers directly or request competitive bids.

GroundTruth Drilling & Exploration

Yard: Dawson City, YT (12.2 km away)

Serves Dawson City
Confirm the contractor's provincial licence before you hire
Northern Placer & Bedrock Deep Water Sourcing Sonic & Rotary Drilling

Vision Quest Drilling Inc.

Yard: Whitehorse, YT (441.7 km away)

Serves Dawson City
Confirm the contractor's provincial licence before you hire
Mineral & Water Drilling Exploratory Boreholes Remote Camps

Northwell Drilling

Yard: Whitehorse, YT (441.9 km away)

Serves Dawson City
Confirm the contractor's provincial licence before you hire
Homestead & Acreage Wells Well Rehabilitation Submersible Pumps

Kluane Drilling Ltd.

Yard: Whitehorse, YT (439.3 km away)

Confirm the contractor's provincial licence before you hire
Remote Access Drilling Deep Geotechnical Bedrock Coring

Looking for more regional well drillers?

Explore all registered water well contractors operating across YT.

Featured Contractor Spot

Are you a licensed well driller serving Dawson City?

Claim your verified listing profile and be found by homeowners on this report.

Claim Local Listing

Frequently Asked Questions

Quick answers about water wells in Dawson City.

What is the median well depth in yt-dawson-city?

Among 24 producing water wells with a recorded depth, the median is 59.8 ft (18.229 m).

Adjacent Municipalities & Nearby Well Records

Explore neighbouring hydrogeological formations and compare drilling depths